fbpx Skip to main content

The customer voice says it all, there is no better product advertising, promotion or endorsement than what an actual customer can say. On their SWR purchase, Ganotec-Muga Fab was able to increase their pipe welding productivity up to 300%, lower their repair rates to 0.5%, reduce dependency on highly skilled welders, and increase margins on the projects they have already won.

Ganotec-Muga Fab approached Novarc because they needed to find a way to overcome the challenge of finding skilled labour in an increasingly challenging market. They also had to increase fabrication shop productivity with less welders and to find a solution that would allow an average welder to produce the same quality while increasing the quantity of welds as a highly skilled welder could.

The Solution – When they came across Novarc, Ganotec-Muga Fab was looking for a solution that would address their challenges around increasing shop productivity and finding skilled labour. With the smallest footprint in the industry, the Spool Welding Robot (SWR) is a collaborative welding machine designed specifically for 1G welding and it was the right fit. By reducing the repair rates to 0.5%, customers can recover around $150,000/yr back onto their bottom-line. “For the past 10 years, our repair rates for the fabrication shop have been just below 2%. But if we are looking at just the SWR, the repair rate is about 0.5% when welding 12” – 36”, carbon steel and chrome pipes”, says Cartier. Ganotec-Muga Fab is fabricating piping in accordance with ASME B31.1, ASME B31.3 & CSA Z662.

Need more proof from actual customers? More case studies are here. It’s time to connect and start the conversation.

de_DEGerman